Slip Resistance Application

A Slip Resistance application is essential to treat floors and surfaces susceptible to accidents from a slip or fall. Our coating features a fine aggregate, similar to 200 grit sandpaper. The resistance is almost invisible to the eye, but still addresses floor safety.

Slip Resistant Application

This eco-friendly slip resistance application contains extremely low VOC’s, and has no fumes or odors.  Apply easily with a paint brush, paint roller or low pressure airless spray.

Each ounce of Slip Resistance Coating can provide protection over approximately 2-3 square feet depending on the nature of the surface. Stir or shake the container vigorously to mix well prior to use. The targeted surface should be free of dirt, debris and oil or grease, prior to application.

The coating goes on easily and dries to a clear glossy finish. One coat is usually sufficient. However, if a second coat is required, wait until the first coat is thoroughly dry.  Allow 24 hours or more for full cure before subjecting the surface to heavy traffic. Do not apply at temperatures below 5°F or above 90°F. Avoid heavy buildup, puddling and overlapping.

Cleaning Slip Resistant Surfaces

Due to its textured nature, Slip Resistance Coating, will attract and hold dirt and oils if not cleaned regularly.  Surfaces treated with slip resistance coating may be cleaned daily. Use mops or nylon bristle brushes and standard liquid floor cleaners for daily cleaning. Periodically, clean your treated floor, tub or other surface more thoroughly. Use a soft to medium nylon bristled brush or push broom using a non-solvent based cleaner/degreaser.

DO NOT clean slip resistance coated surfaces with highly abrasive tools. Such as Scouring Pads, Motorized Rotary Cleaning Devices, Abrasive Sponges, Burnishing Devices, Steel Brushes, Diamond Pads, Sandpapers or other Buffing Devices. Over abrasion will damage the surface of the coating, removing the non-slip textured aggregate and damaging the surface appearance. DO NOT use Harsh Chemical Solvents to clean as they may damage or remove the coating.

Visit our online store to purchase slip resistant applications in a variety of sizes.